Brivo ACS6100 valdymo skydeliai yra pagrindiniai jūsų Brivo prieigos valdymo platformos komponentai. ACS6100 valdymo skydeliai palaiko esamas ACS6000 pagrindines plokštes kartu su ACS6100 durų ir I/O išplėtimo plokštėmis. 

Brivo ACS6100R-E įprastas skydelis - (Apima įprastą važiuoklę, pagrindinę plokštę, maitinimo plokštę, akumuliatorių ir transformatorių. Šioje važiuoklėje tilps dvi papildomos priedų plokštės).

Programos

• Padidinta durų ir I/O plokščių talpa 
• Palaiko
  • „Brivo Smart Readers“, taip pat OSDP ir „Weigand“ skaitytuvai 
  • Nuotoliniai programinės įrangos atnaujinimai 
  • 30 kortelių skaitytuvų viename valdymo pulte 
  • Brivo Mobile Pass 
• Prieglobos ryšys per eternetą arba WiFi. Pagal pageidavimą galimi mobiliojo ryšio variantai 
• Priimančiojo kompiuterio autentifikavimas naudojant skaitmeninius sertifikatus 
• IP pagrįsta prieigos kontrolė ir aliarmai 
• Modulinis augimas per išplėtimo plokštes 
• Šifruota saugykla ir ryšiai 

Specifikacijos

• Total number of credentials
  
  • Unlimited credentials per panel when online
    and connected to Brivo Access. Up to 250,000
    credentials per panel while offline 
• Maximum number of card readers 
  
  • 2 on the controller board, and up to 30
    (with 14 expansion door boards)  
• Event history 
  • 60,000 events (FIFO) offline from host 
• Input points 
  • Up to 120 (with 14 expansion boards)
    8 inputs per board
    On board; (2) door position points; (2) Request
    to exit points; (4) Auxiliary input points 
• Output relays
  • Up to 118 (with 14 expansion boards)
    6 outputs per board
    Form C (SPDT) 350mA @ 12VDC – (2)
    lock switching (wet)
    Form C (SPDT) 6A @ 28VDC (4) Auxiliary
    output relays (dry only) 
• Maximum number of input/output and/or door board expansion boards
  • Up to 14 per ACS6000-MBE main board 
• Authentication and encryption
  • ACS6000-E uses TLS1.3, with AES256
    encryption and SHA256 certificate
    with a 4096-bit key length
    OSDP support for Secure
    Communication Protocol (SCP) 
• Max power consumption (board only)
  • 12VDC @ 1.5A peak with all relays engaged 
• Card reader inputs
  • 2 RS-485 OSDP or 2 Wiegand 
• ACS6100 board dimensions
  • 5”h x 11.5”w 
• Board communication bus
  • CAN Bus – Use CAT5 (or higher) UTP cable up to 1,500 feet 
• Temperature and humidity range
  • Operating temp: 32F to 125F, (0 to 49C) Humidity; Max 85% non-condensing 
• Included components
  • ((2) MOV surge suppressors and (16) 2K ohm end-of-line resistors 
• Expansion board capacity 
  • ACS6100R-E – Capacity for (1) ACS6000 -controller board and (2) ACS6100 accessory boards or up to (4) ACS6100 accessory boards.
    ACS6100L-E – Capacity for (1) ACS6000 controller board and (6) ACS6100 accessory boards, or up to (8) ACS6100 accessory boards.
    Additional Chassis enclosures can be chained together via the CAN Bus to connect (1) controller board to up to (14) Door/IO boards. 
• Power supply (included)
  • 12VDC @ 4.2A (Supports expansion boards and readers only) | Aux output – 12VDC @ 250mA (Not to be used for lock power) 
• Transformer (included)
  • ACS6100R-E - (1) 19VDC @ 50W Transformer | ACS6100L-E - (2) 19VDC @ 50W Transformers 
• Standby batteries and cables (included)
  • ACS6100R-E – (1) 12VDC 14Ah Rechargeable | ACS6100L-E – (2) 12VDC 14Ah Rechargeable 
• Enclosure dimensions
  • ACS6100R – 17.283”h x 15.63”w x 4.0”d | ACS6100L – 27.283”h x 15.63”w x 4.0”d 
• Host communications
  • Ethernet and/or WiFi IEEE 802.11 b/g/n (Cellular connection is also supported with separate optional Cellular Network Module)