ACS6000-E valdymo skydelis (yra dviejų plokščių važiuoklė, pagrindinė plokštė, maitinimo plokštė, baterija ir transformatorius) 

Programos

• IP pagrįsta prieigos kontrolė ir signalizacija 
• Palaiko iki 30 kortelių skaitytuvų viename valdymo skydelyje 
• Palaiko Brivo Mobile Pass kredencialus 
• Priimančiojo kompiuterio ryšys per eternetą ir (arba) „Wi-Fi“ 
• Šifruota saugykla ir ryšiai 
• Priimančiojo kompiuterio autentifikavimas naudojant skaitmeninius sertifikatus 
• Modulinis augimas per išplėtimo plokštes 
• Palaiko „Wiegand“ ir OSDP suderinamus skaitytuvus 
• Palaiko tam tikras belaidžias durų spynas 

Specifikacijos

• Total number of credentials
  
  • Unlimited credentials per panel when
    online connected to Brivo Access. Up to
    250,000 credentials per panel while offline. 
• Maximum number of card readers 
  
  • Up to 30 (with 14 expansion door boards) 
• Event history 
  • 60,000 events (FIFO) offline from host 
• Input points 
  • Up to 120 (with 14 expansion boards)
    8 inputs per board
    On board; (2) door position
    points; (2) Request to exit points;
    (4) Auxiliary input points  
• Output relays
  • Up to 118 (with 14 expansion boards)
    6 outputs per board
    Form C (SPDT) 350mA @ 12VDC
    – (2) lock switching (wet)
    Form C (SPDT) 6A @ 28VDC (4)
    Auxiliary output relays (dry only) 
• Maximum number of input/output and/or door board expansion boards
  • Up to 14 per ACS6000-E main board 
• Authentication and encryption
  • ACS6000-E uses TLS1.2+, with AES256
    encryption and SHA256 certificate
    with a 4096-bit key length 
• Max power consumption (board only)
  • 12VDC @ 1.5A peak with all relays engaged  
• Card reader inputs
  • 2 Wiegand or RS-485 OSDP 
• ACS6000 board dimensions
  • 5”h x 11.5’w 
• Board communication bus
  • CAN Bus – Use CAT5 (or higher) UTP cable up to 1,500 feet 
• Temperature and humidity range
  • Operating temp: 32F to 125F, (0 to 49C) Humidity; Max 85% non-condensing 
• Included components
  • (2) MOV surge suppressors and (16) 2K ohm End-of-line resistors 
• Power supply (included)
  • 12VDC @ 3A (Supports expansion boards and readers only)
    Aux output – 12VDC @ 250mA (Not to be used for lock power) 
• Transformer (included)
  • 19VDC @ 36W 
• Standby batteries and cables (included)
  • ACS6000 – (1) 12VDC 7Ah Rechargeable 
• Enclosure dimensions
  • ACS6000 – 17.283”h x 15.63”w x 3.5”d 
• Host communications
  • Ethernet and/or WiFI IEEE 802.11 b/g/n